封隔器胶筒高温高压密封性能检测试验研究

设计研制一种封隔器胶筒密封性能试验装置。该装置可模拟油井下350℃高温、20 MPa高压恶劣工况,能够模拟封隔器胶筒坐封过程,能够对封隔器胶筒的密封性能进行检测。借助试验装置对不同形式的胶筒进行环空密闭试验,测试了不同形式封隔器胶筒在不同介质下环空腔内压力变化规律,得到了试验后胶筒的形变状态、腐蚀破损情况,检验了各形式胶筒在高温高压工况下的密封性能,为封隔器胶筒的设计和改进提供可靠的试验依据。     

膨胀剂对约束条件下UHPC早期抗裂性能影响的试验研究

超高性能混凝土(UHPC)在钢桥面铺装结构中由于铺装材料受到钢板、栓钉等的约束,加上材料本身水胶比小,更易收缩,早期容易承受拉应力导致开裂。通过在拌和过程中添加膨胀剂可以起到减小收缩的作用,但该方法对于约束条件下的UHPC铺装的早期抗裂性能提升是否有促进作用,仍需通过更多试验进行合理评估和深入研究。通过圆环法对3组不同配方的UHPC在均匀约束条件下的早期抗裂性能进行定量测试,并将试验数据进行回归分析和计算,得到了各组的平均应力发展速率,进而评估了各组的开裂风险等级。试验结果表明,通过在UHPC中加入适量膨胀剂,可使其最终收缩应力减小,并可降低其收缩应力发展速率,进一步降低其在约束条件下的开裂风险。     

红河流域径流演变分异及其特征

红河流域径流演变分异研究对于揭示流域径流的形成、演变规律及跨境水管理具有重要意义。选取红河流域9个代表站点,利用累积距平法、滑动t检验和Mann-Kendall-Sneyers法研究了红河流域的径流演变分异。结果表明,径流演变空间差异显著,各控制断面波动不一致;流域各站点(除大东勇站)均出现径流突变,但突变时间不一致,且越往下游,突变时间越晚;此外,各站点丰枯转化时段不一致。     

航空装备保障智能化发展认识与探讨

自新一代人工智能技术迅猛发展以来，世界各国在智能领域动作频繁，军事化应用明显有加速之势，给装备保障带来了变革性发展的机遇。紧密围绕作战-装备-技术-保障之间的依托关系，从作战需求、装备特点、装备设计、诊断测试和技术驱动等五个角度梳理了装备保障发展的关键因素，给出了装备保障60余载发展历程的诸多原因和显著成果；通过对未来作战模式和未来作战平台保障需求的前瞻性判断，分析了未来作战需求和装备牵引装备保障转变的典型技术特征；并在装备保障领域人工智能技术的发展和应用现状总结分析的基础上，系统地提出了装备保障智能化发展的建设性意见和建议，为国内装备保障智能化发展探索了一个可能的技术方向。     

ETSI EN 301893 V2.1.1中自适应测试方法及要点

介绍了ETSI EN 301893 V2.1.1:2017中的新增自适应测试参数,该测试是5G WiFi测试中的一个难点。通过对测试中遇到的常见问题及测试结果分析,指出了测试中需要注意的测试环境搭建细节。     

Experimental study of remaining creep life of SA-304L stainless steel using small punch creep test

In this paper, the remaining creep life of SA-304L stainless steel at elevated temperatures is studied. The small punch creep tests (SPCT) were performed on SA-304L virgin and aged materials at constant loads. Times to fracture and the minimum deflection rate in SPCTs were recorded, and the time-temperature parametric analysis was performed, based on experimental results. The constants of the Larson–Miller parameter and the Monkman–Grant relationship were obtained for different consumed creep life ratios, and eventually the equations were established to explain the variation of constants of the Larson–Miller parameter and the Monkman-Grant relationship with respect to the consumed creep life ratio.     

泳池式轻水反应堆内电磁线圈可控温辐照装置设计

本文设计了在泳池式轻水反应堆（简称泳池堆）内在线测量电磁线圈电性能的可控温辐照装置。采用MCNP程序进行中子物理计算，对泳池堆、线圈骨架的结构尺寸与物质组分进行了精细全尺寸模拟，得出辐照装置的发热功率和中子注量率。通过初步估算，使用ANSYS CFX进行了数值模拟，得出辐照装置内线圈在堆运行时的温度，并提出温度控制的方法。辐照装置采用铝材加工制造，并进行了垂直度测试、气压测试、检漏测试。增加了绝缘设计，将辐照装置与泳池堆之间进行绝缘。在线圈处预埋铠装热电偶，对线圈温度进行实时监测。在泳池堆内对电磁线圈进行辐照试验，结果表明，本文设计的辐照装置能满足电磁线圈在泳池堆孔道内进行辐照试验的要求，并可对电磁线圈进行实时温度控制。     

Impact of an Engineered Copper-Titanium Dioxide Nanocomposite and Parent Substrates on the Bacteria Viability,Antioxidant Enzymes and Fatty Acid Profiling

Due to the systematic increase in the production of nanomaterials (NMs) and their applications in many areas of life, issues associated with their toxicity are inevitable. In particular, the performance of heterogeneous NMs, such as nanocomposites (NCs), is unpredictable as they may inherit the properties of their individual components. Therefore, the purpose of this work was to assess the biological activity of newly synthesized Cu/TiO₂-NC and the parent nanoparticle substrates Cu-NPs and TiO₂-NPs on the bacterial viability, antioxidant potential and fatty acid composition of the reference Escherichia coli and Bacillus subtilis strains. Based on the toxicological parameters, it was found that B. subtilis was more sensitive to NMs than E. coli. Furthermore, Cu/TiO₂-NC and Cu-NPs had an opposite effect on both strains, while TiO₂-NPs had a comparable mode of action. Simultaneously, the tested strains exhibited varied responses of the antioxidant enzymes after exposure to the NMs, with Cu-NPs having the strongest impact on their activity. The most considerable alternations in the fatty acid profiles were found after the bacteria were exposed to Cu/TiO₂-NC and Cu-NPs. Microscopic images indicated distinct interactions of the NMs with the bacterial outer layers, especially in regard to B. subtilis. Cu/TiO₂-NC generally proved to have less distinctive antimicrobial properties on B. subtilis than E. coli compared to its parent components. Presumably, the biocidal effects of the tested NMs can be attributed to the induction of oxidative stress, the release of metal ions and specific electrochemical interactions with the bacterial cells.     

饱和尾粉砂动孔隙水压力发展特性试验研究

采用动三轴仪对内蒙古某尾矿库尾粉砂进行了动强度试验,研究了围压、相对密实度及固结比对动荷载作用下尾粉砂中孔隙水压力发展特性的影响。研究结果表明,随着固结比、相对密实度、围压的增大,动荷载作用下饱和尾粉砂孔压增长曲线形状由陡峭转变为平缓。随着围压及固结比增大,试样动力破坏形式从以孔压值为主要表征指标的液化破坏,转化为以动剪应变为主要破坏形式的软化破坏。动荷载作用下发生液化破坏的饱和尾粉砂孔压增长过程分可为初始增长阶段、稳定增长阶段和快速增长至破坏阶段,孔压增长曲线表现为明显的反S型,本文采用双对数函数对该试验孔压增长曲线进行拟合,结果表明该模型可以较好地模拟尾粉砂在动荷载作用下的孔压发展规律。     

Comparison of mechanical properties of ground corn stover,switchgrass, and willow and their pellet qualities

Mechanical and physical properties of ground corn stover, switchgrass, and willow were measured and compared in addition to the quality of pellets. Biomass was size-reduced with two different screen sizes (3.175 and 6.35?mm) and conditioned to obtain samples at two different moisture contents (17.5 and 20% on wet basis). Ground switchgrass had the smallest and willow had the highest D₅₀ when size-reduced with the same screen size. Hydrostatic triaxial compression tests were performed using the cubical triaxial tester to determine the bulk modulus, compression index, and spring-back index at specific unloading pressures (20, 45, 70, and 95?kPa). The trends of pressure vs. volumetric strain and void ratio vs. natural log of pressure were similar for all three materials; however, the magnitudes were different. Willow, size-reduced with 3.175?mm screen size at 17.5% wet basis, had the highest bulk modulus among different conditions of all the three biomass. Pellet durability values for all the three materials were higher than 80%. Corn stover pellets formed with 3.175?mm screen size at 20% wet basis had the highest diametral tensile and axial compressive strengths among different conditions for all the three biomass, however the values were not significantly different (p?>?0.05).